SS 316/316L/316Ti Flanges
Sankalp Alloys Overseas ensures that being a prominent manufacturer, supplier, stockist, and exporter, the best quality products of Stainless Steel 316, 316L, and 316Ti will be ensured for use in various industries.
Stainless Steel 316 is a chromium-nickel steel added with molybdenum to increase its resistance toward a vast number of substances. Adding molybdenum to SS 316 enables it to improve its general corrosion resistance and have specific resistance to chlorine pitting. It has an expanded field of applicability at high or elevated temperatures compared to other stainless steels. It has more excellent resistance to heat than Type 304 but otherwise has many of the same general characteristics.
Stainless Steel 316/316L/316Ti Flanges Manufacturers, Stainless Steel 316/316L/316Ti Flanges Suppliers, Stainless Steel 316/316L/316Ti Flanges Stockists, Stainless Steel 316/316L/316Ti Flanges Exporters
Stainless Steel 316/316L/316Ti Flanges Manufacturers in India, Stainless Steel 316/316L/316Ti Flanges Suppliers in India, Stainless Steel 316/316L/316Ti Flanges Stockists in India, Stainless Steel 316/316L/316Ti Flanges Exporters in India
316 has excellent corrosion resistance to chemicals; the paper and textile industries principally use it. Other common uses for this metal include food processing equipment, chemical processing, nuts and bolts, and medical implants.
Stainless Steel 316L was designed to have a far lower carbon content than its 316 counterpart. As such, 316L is helpful in areas where the avoidance of carbon precipitation is desired. The metal is commonly applied in weldments, where its particular carbon content combined with welding guarantees maximum resistance against general corrosion and also in heavy gauge components. It is estimated that 316L has a better oxidation resistance than type 316, especially in warm marine environments. Once again, the low level of carbon protects it from carbon precipitation. The metal also tends to resist extremely cold temperatures that go down to as low as cryogenic temperatures. Where heat is concerned, 316L exhibits superior creep resistance, heuristic stress to rupture, and greater overall strength than other grades of stainless steel.
Stainless Steel 316Ti is known as the stabilized grade of the 316 types but is also one of only two 316 stainless steels recommended for higher temperature situations. This includes adding a small amount, typically only 0.5% of titanium. The properties of other 316 grades are still very much present. When combined with titanium, it allows 316Ti to be protected from precipitation at higher temperatures, especially where there might be long-term exposure.
316Ti also features an addition of molybdenum in its composition. As with other grades of 316, the molybdenum allows added protection from corrosion and pitting from chloride solutions and increased strength when placed in high-temperature environments. Its high-temperature resistance is yet again compounded by its titanium content that allows 316Ti to be immune to precipitation at these temperatures. It resists acids, especially sulfuric acids, hydrochloric acids, and acid sulfates. 316Ti is used for marine applications like heat exchangers, paper mill equipment, and architectural components.
Stainless Steel 316/316L/316Ti Flanges Manufacturers in Mumbai, Stainless Steel 316/316L/316Ti Flanges Suppliers in Mumbai, Stainless Steel 316/316L/316Ti Flanges Stockists in Mumbai, Stainless Steel 316/316L/316Ti Flanges Exporters in Mumbai
316/316L/316Ti Stainless Steel Flanges Equivalent Grades
Stainless Steel 316Ti is known as the stabilized grade of the 316 types but is also one of only two 316 stainless steels recommended for higher temperature situations. This includes adding a small amount, typically only 0.5% of titanium. The properties of other 316 grades are still very much present. When combined with titanium, it allows 316Ti to be protected from precipitation at higher temperatures, especially where there might be long-term exposure.|
STANDARD |
UNS |
WNR. |
AFNOR |
EN |
JIS |
BS |
GOST |
|
SS 316 |
S31600 |
1.4401 / 1.4436 |
Z7CND17‐11‐02 |
X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
SUS 316 |
316S31 / 316S33 |
- |
|
SS 316L |
S31603 |
1.4404 / 1.4435 |
Z3CND17‐11‐02 / Z3CND18‐14‐03 |
X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
SUS 316L |
316S11 / 316S13 |
03Ch17N14M3 / 03Ch17N14M2 |
|
SS 316Ti |
S31635 |
1.4571 |
Z2 NCDU 25-20 |
X1NiCrMoCu25-20-5 |
SUS 316Ti |
904S13 |
- |
Specification of Stainless Steel 316/316L/316Ti Flanges
Stainless Steel Flanges Specification : ASTM A182 / ASME SA182
Dimension Standard : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Size : 1/2" (15 NB) to 48" (1200NB)
Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
DIN Flanges : DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673.
JIS Flanges : JIS B2220 5K, JIS B2220 10K, JIS B2220 16K, JIS B2220 20K
BS Flanges : BS4504 PN 6, BS 4504 PN 10, BS4504 PN 16, BS4504 PN 25, BS4504 PN 40, BS 4504 PN 64, BS 4504 PN 100, BS 4504 PN 160, BS 4504 PN 250, BS 10, BS Table D, BS Table E, BS Table F, BS Table H.
Chemical Alloyion of Stainless Steel 316/316L/316Ti Flanges
|
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
N |
|
|
316 |
0.08 |
2.0 |
0.75 |
0.045 |
0.03 |
min: 16.0 |
min: 2.0 |
min: 10.0 |
0.10 |
|
316L |
0.03 |
2.0 |
0.75 |
0.045 |
0.03 |
min: 16.0 |
min: 2.0 |
min: 10.0 |
0.10 |
|
316TI(S31635) |
- |
- |
- |
- |
- |
16.0 |
2.00 |
10.0 |
- |
|
0.08 |
2 |
0.75 |
0.045 |
0.03 |
18.0 |
3.00 |
14.0 |
0.1 |
Mechanical Properties Of Stainless Steel 316/316L/316Ti Flanges
|
Grade |
Tensile Strength |
Yield Strength |
Elongation % |
Hardness (Brinell) MAX |
Hardness |
|
316 |
75 |
30 |
40 |
217 |
95 |
|
316L |
70 |
25 |
40 |
217 |
95 |
|
316TI(S31635) |
515(Mpa) |
205(Mpa) |
35 |
205 |
75 |
Physical Properties of 316/316L/316Ti Stainless Steel Flanges
|
Density |
Thermal Conductivity |
Electrical |
Modulus of |
Coefficient of |
Specific Heat |
Melting |
|
0.29 at 68°F |
100.8 at 68 212°F |
29.1 at 68°F |
29 |
8.9 at 32 – 212°F |
0.108 at 68°F |
2500 to 2550 |
| - | - | - | - |
9.7 at 32 – 1000°F |
0.116 at 200°F |
- |
| - | - | - | - |
11.1 at 32 – 1500°F |
- |
- |
OUR EXPORT
| Eastern Europe | Asia | North America | Western Europe | Mid East/Africa |
| Australia | Central/South | UAE | America | Portugal |
| Spain | Indonesia | Italy | Angola | Poland |
| Brazil | Sri Lanka | Russia | China | Singapore |
| Oman | Venezuela | Costa Rica | USA | Qatar |
| Thailand | Canada | Saudi Arabia | Bahrain | Egypt |
| Malaysia | Turkey | Mexico | China | Peru |
| United States | Nigeria | Jordan | Kuwait | Dubai |
| Bangkok | Iran | Germany | UK | New Zealand |
| Vietnam | South Africa | Mexico | Kazakhstan |
DOMESTIC AREA
| Mumbai | Ahmedabad | Bhopal | Bikaner | Pune |
| Delhi | Chennai | Visakhapatnam | Mangalore | Nagpur |
| Bangalore | Kolkata | Siliguri | Assam | Indore |
| Hyderabad | Surat | Nashik | Cochin | Thane |
| Faridabad | Rajkot | Aurangabad | Bhavnagar | Ranchi |
| Coimbatore | Mysore | Salem | Tirupur | Bikaner |
| Raipur | Bhubaneswar | Bhilai | Ankleshwar | Bhiwandi |
| Vadodra | Kochi |
People Also Search